Fora V20 Manual Del Usuario página 20

Step 3
Apply control solution.
Shake the control solution vial thoroughly before use. Squeeze out a
drop and wipe it off, then squeeze out another drop and place it on
the tip of the vial cap.
Hold the meter to move the absorbent hole of the test strip to touch
the drop. Once the confirmation window fills completely, the meter will
begin counting down.
To avoid contaminating the control solution do not directly apply
control solution onto a strip.
Step 4
Read and compare the result.
After counting down to 0, the control
solution test result will appear on the
display. Compare this result with the
range printed on the test strip vial and
it should fall within this range. If not,
please read the instructions again and
repeat the control solution test.
20
Normal
109~165