Fora V20 Manual Del Usuario página 23

3. Twist the protective disk off the lancet.
4. Replace the cap by aligning the arrow on the
cap with the release button.
5. Select the depth of penetration by turning
the adjustable tip in either direction so that
the arrow on the cap points to the desired
depth.
6. Pull the cocking control back until it clicks.
You will see a color change inside the re-
lease button when it is ready.
If it does not click, the device may have been
cocked when the lancet was inserted.
The lancing device is now ready for use. Set aside for later use.
23