Installation Instructions - Home Decorators Collection SKU 1002099626 Manual De Instrucciones

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
1 Ground Screw (#12)
1 Cross Bar (#11)

INSTALLATION INSTRUCTIONS:

1. Screw the two Mounting Screws (#10) into the cross bar (#11). Mount the cross bar (#11) to the
Outlet Box (#9) using the two provided Outlet Box Screws (#13). [Make sure the threads of the
Mounting Screws (#10) are facing outside when the cross bar (#11) is attached to the Outlet Box
(#9).] The side of the Cross Bar (#11) marked "GND" must face out.
2. Connect the white wire from the fixture to the white wire from the Outlet Box (#9), and the black
wire from the fixture to the black wire from the Outlet Box (#9). Cover the two wire connections
using the provided Wire Connectors (#8). Wrap the two wire connections with electrical tape for
a more secure connection. If your outlet box has a ground wire (green or bare copper), connect
fixture's ground wire to it using the wire connector (#8). Otherwise connect the copper ground
from the fixture to Ground screw (#12) on the Cross bar (#11). Note: If you have electrical
questions, consult your local electrical code for approved grounding methods.
3. Mount the body of the fixture on the wall by aligning the protruding Mounting Screws (#10) all
the way through the holes on the Back Plate (#4). Be careful not to pinch any of the wires
between the fixture and the Outlet Box (#9). Tighten the fixture to the wall by screwing the two
cap nut (#3) onto the two protruding Mounting Screws (#10).
4. Once the fixture is mounted on the wall, caulk the space between the wall and the upper 3/4 area
of the Back Plate (#4) to prevent water seeping into the Outlet Box (#9). Leave the bottom 1/4
area un-caulked for drainage of any water which might leak into the enclosure.
5. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the light
switch on to activate the fixture.
Page 6
2 Outlet Box Screws (#13)
3 Wire Connectors (#8)
2 Mounting Screws (#10)