sanindusa PLAN Instrucciones De Montage Y Manutencion página 71

INDICATOR
The red LED indicator in the sensor blinks when the user steps within the sensor's range.
CAUSE
Debris or dirt in the solenoid valve orifice.
The solenoid valve doesn't close properly.
The plunger seal is torn or damaged.
SOLUTION
Replace or clean the solenoid valve. Unscrew the solenoid, pull out the plunger and the
spring from the solenoid and clean them. When placing the plunger and spring back,
please make sure the spring is in vertical position.
//TROUBLE – SHOOTING