Changing Password - CPA Easy pool Manual De Instalacion Y Uso

MANUALE D'INSTALLAZIONE E USO
PASSWORD
STAND BY (STOP)
Push STB button during the functioning to put the pump in stand by/Stop mode:
1) Dual stops dosing (stops the plug's activity)
2) Green on led blinks.
the display shows alternativenly "Stop " and the measure on the second line (see figure here above)
3)
Push again the STB button to return DUAL to the programmed functioning.
LEVEL CONTROL (OPTIONAL)
The closing of the level input contact, free of tension, while the pump is working, will cause:
1) the dosing stops (if level probe is on CL in DUAL pH/CL REG system, the plug activity stops)
2) the green ON led blinks
3) the display shows "Lev" alternatively on the second line and the actual measure.
Here above there is the example of level alarm on pH pump.
When the level contact gets opened again, the pump returns to working mode compatible with the actual inputs.
NOTE: The level alarm suspends (but not reset) the counting of the Alarm Time.
Codice 1075262
WHAT IS IT? The password is a number (from 0 to 255) that allows to
block the "Operation Type " programming (submenu: "pH Operation
Type" and "Cl Operation Type" ). All other settings are possible
including pH and Cl probe calibrations.

CHANGING PASSWORD

*
Old password
* *
New password
pag. 21 a 56
Ver.01 – 19/06/20