How To Use - Silk’n Cleansing Box Instrucciones De Uso

How to use

Refer to the diagram to see the relevant parts.
1. Place the batteries inside the compartment (#6).
2. Select the correct disinfection head for your device (#1). To swap heads, release
the head from the device. Use a small blunt tool to lever the head off the device
carefully. There is a small lip (#5) to insert the tool. Make sure that the correct
head is placed in the direction shown in the diagram.
3. Next, place the device into the disinfection head, with the treatment surface
face down. It will fit snuggly if the correct head is in place.
4. Push the device down so it presses on the On/Off button to activate the box. The
blue LEDs will turn on automatically for 5-6 minutes. This is the amount of time
required for a full disinfection process. It is also possible to stop the disinfection
process before time, by pushing the device down again so it presses the On/Off
button and deactivates the box.
Warning! We recommend that you do not
operate the On/Off switch manually to
protect your eyes from concentrated light.
4