Publicidad
Idiomas disponibles
Idiomas disponibles
Space Requirement
• Select a location without direct exposure to sunlight;
• Select a location with enough space for the refrigerator doors to open
easily;
• Select a location with level (or nearly level) flooring;
• Allow sufficient space to install the refrigerator on a flat surface;
• Allow clearance to the right, left, back and top when installing. This will
help reduce power consumption and keep your energy bills lower.
• Keep at lest 50mm gap at two sides and back.
• this refrigerating appliance is not intended to be used as a built-in
appliance
Positioning
Install this appliance at a location where the ambient temperature
corresponds to the climate class indicated on the rating plate of the
appliance:
for refrigerating appliances with climate class:
- extended temperate: this refrigerating appliance is intended to be used
at ambient temperatures ranging from 10 ° C to 32 ° C;
- temperate: this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 ° C to 32 ° C;
- subtropical: this refrigerating appliance is intended to be used at
ambient temperatures ranging from 16 ° C to 38 ° C;
- tropical: this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 ° C to 43 ° C;
Location
The appliance should be installed well away from sources of heat such as
radiators, boilers, direct sunlight etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure best performance, if the
appliance is positioned below an overhanging wall unit, the minimum
distance between the top of the cabinet and the wall unit must be at least
100 mm. Ideally, however, the appliance should not be positioned below
overhanging wall units. Accurate leveling is ensured by one or more
adjustable feet at the base of the cabinet.
Warning! It must be possible to disconnect the appliance from the
mains power supply; the plug must therefore be easily accessible
after installation.
39
Publicidad
