Samoa DF100 Serie Manual De Operación Y Mantenimiento página 11

Directflo pumps use in potentially explosive atmospheres ATEX (Ex)
• If the unit is marked with the symbol,
the pump, are indicated the areas for which the equipment is approved. You will also find the maximum allowable surface temperature in
the same plate.
• Always ground the pump.
• When removing the pump, remember to remove the ground wire.
• Use a grounding cable of at least 12 gauge (2.0 mm
• If the pump you have purchased is valid for Atex, a specific Atex manual will accompany this one. Read this manual before operating the
pump.
• Make sure the pump is maintained properly by qualified personnel. Use original components by Samoa Industrial S.A. for its maintenance.
The use of non-original parts causes the loss of approval for use in potentially explosive atmospheres ATEX (Ex) of the pump.
• Any change or modification is made at your own risk and it will invalidate the approval for the Atex pump atmospheres (Ex).
Samoa Industrial, S.A. · Box 103 Alto Pumarín · 33211 Gijón - Asturias Spain · Tel.: +34 985 381 488 · Fax.: + 34 985 384 163
Operation
it can be used in potentially explosive atmospheres. Below this symbol, in the nameplate of
).
2
11
R. 02/11 855 807