Bissell CROSSWAVE PET 2328 Serie Manual Del Usuario página 12

Maintenance:
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
9
If the inside area where
the dirty water tank sits is
dirty, wipe it clean with a
rag or towel.
NOTE: Make sure to clean your dirty tank and let all components dry out after
each use to keep your product at its best.
12
Place strainer back into
dirty water tank.
12
www.BISSELL.com
Dirty Water Tank (cont.)
10
Leave parts out to dry before
reassembling.
13
Once parts are dry,
reassemble and replace
the top of dirty water tank.
11
Place vacuum filter back
into the top of the dirty
water tank.
14
Angle the dirt tank back into
body of machine inserting
bottom first. Then tilt the
top of the dirt tank toward
the machine and push into
place until you hear a click.