Bissell CROSSWAVE PET 2328 Serie Manual Del Usuario página 9

Maintenance: Rinse and
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1
Place unit on rinse and
storage tray.
4
Turn the machine ON by
pressing the Hard Floor
button.
7
Pull brush roll out by grabbing the
brush roll tab and pulling upward.
Storage Tray
2
Fill rinse cup with water.
5
Recline the machine while
in storage tray. Allow the
machine to run for 10-15
seconds until all water is
picked up. Repeat as needed.
8
Place the brush roll upright in the Brush Roll
Drying Tray to dry.
3
Pour water into rinse funnel
to fill the MAX line of the
rinse and storage tray.
6
Grasp brush roll window
at the front of the window
and pull upward to remove.
www.BISSELL.com
9