LAZER Wideclear Lumino Manual De Uso página 3

UK
Congratulations
You have just bought the Lazer Wideclear Lumino Vi-
sor, the most convenient and efficient sun protection
for your helmet. The Wideclear Lumino Visor helps
to enhance visual performance by self-adjusting in
sun, shade, day and night for a smooth, comfortable
ride. Unlike traditional clear or tinted shields, which
are static, this visor automatically adjusts his level
of darkness or brightness depending on changing
outdoor light conditions.
transitions ® teChnology
• Pioneers in the field, Transitions Optical took
decades of R&D to apply advanced
Photochromic technology into motorcycle visors.
• Designed to quickly adapt to changing conditions.
The visors darken when exposed to UV rays
• Helps to protect the eyes from the sun while
enhancing vision, providing visual comfort and
reduced eye strain
• As used in Oakley Transitions lenses
®
Key Points
T T
®
ransiTions echnology
• Ranges from 87% to 20% of light transmission
• Activates to 30% of light transmission
in 35 seconds (Darkening)
• Full activation in 2 minutes
• Fades to 50% of light transmission in 2 minutes
• Reacts to UV light
a '
dapTs conTinuously To The sun s inTensiTy
• In all weather conditions
• Rests and relieves always the eyes
WIDECLEAR
Mise en garde LSP03 DEF.indd 4-5
e
xTraordinary opTical qualiTies
• Enhances visibility
• Diminishes all forms of glare
• Blocs UV 100%
n
o addiTional weighT
• T he helmet is not burdened with an extra 150
grams or more (Internal Sun Visor)
• More comfort
n
o manipulaTion
• Both hands can remain on the handlebars
• Safer riding
a -F p
nTi og inlock visor wiTh widened peripheral vision
• Lazer helmets factory fitted with the Wideclear
Lumino visor do have the Pinlock lens included
• As accessory, the Wideclear Lumino visor is
Pinlock Ready (no Plinlock lens included)
m
ore proTecTion
• The internal impact absorbing (EPS) liner is not
hollowed-out to make place for an internal sun
visor
oPtiCs
o
pTimal opTical qualiTies
c 3 (e )
aTegory uropean norm
• Very few internal sun visors reach this degree
• Same protection as the best sun glasses
B 100% uv-a uv-B
locs oF and
• Uses UV rays to darken visor
e p
ye roTecTion
• Reduces all glares on the road
• Enhanced visual comfort
• Rests the eyes under all light conditions
• Reduces eye strain & fatigue
- 4 -
seCurity
• No handling of an internal sun visor is required, no
fumbling to look for the lever
• Both hands can remain on the handlebars and
the mind can stay on the road and the ride
• Unbreakable, as integral part of the main visor
More ProteCtion
• The inner liner, a vital protective layer, remains
intact
• For an internal sun visor, it is necessary to remove
part of the inner liner, which weakens it inevitably
• The 22.05 homologation norm is a minimum and
it does not take into account this weakening of
the inner liner
Warning
• For your visor to be as most efficient as possible,
please read carefully the instructions
• Efficiency of the Wideclear Lumino Visor depends
on ambient temperature
• The Wideclear Lumino Visor is not warranted
shatterproof
MaintenanCe instruCtion
• Anti-fog treatments can be fragile. Please ensure
when cleaning the lenses that only a warm mild
soap solution is used if needed
• Do not use solvents, alcohol nor hydrocarbon
products
USER MANUAL - 5
hoW to Change and rePlaCe the Visor
(k , o & k l )
iTe sprey esTrel azer helmeTs
T v :
o change The isor
• The visor must be in the open position
• Pull the security lock (A) downwards
• The visor will unlock
• Detach the upper part from the holding ring (B)
by pulling it delicately outwards
• The visor is now detached from one side
• Repeat the above steps for the other side
T v :
o replace The isor
• The lock must be in the high position (=closed)
• Hold the visor in the open position. Ensure that
the visor latches are aligned with the latches of
the fitting kit
• Insert the holding ring (C) into the fitting kit
starting with the top part of the ring
• Gently press with your thumb on the entire hol-
ding ring (C) to lock the visor. A click confirms
that the visor is locked into position (D)
• Check if the security lock (E) is in the closed
position
• Repeat the above steps for the other side
• Open and close the visor a few times to ensure
the visor is secure and functions properly
W W W.LA zER HELME TS.COM
- 5 -
16/12/14 09:30