Du Pont WFPF3800 Serie Manual De Instalación página 4

STEP 1
Turn Off the Main Water Supply Line
C UTION
The Filter System must be installed after the water meter or pressure tank.
1
Turn off the main water supply line to your home.
2
Purge all water from the plumbing lines by turning on all faucets in your home and draining completely.
STEP 2
Configure Your System
See the System Configuration Chart below to determine how you will configure your filter system.
Type of plumbing in your house:
Quantity Fitting Method
2 Std Male Adapter
2 Compression
2 Union
NOTE: For galvanized piping, consult a professional plumber.
WFPF3800 / WFPF2800 Series
Materials Needed For 3/4" Diameter Housing Inlet/Outlet Ports
3/4" Copper Pipe 1" Copper Pipe
No individual fitting - it
Solder according to local will require more than
plumbing just 1. Solder according
to local plumbing codes
1" x 3/4" reducing
coupling & 3/4" male
3/4" Male Adapters
adapter & 3/4" x 2" copper
nipple
3/4" OD tube x 3/4" MIP Compression not readily
Compressions Male available for 1" copper
Adapter pipe
1" Copper Union & 1" x
3/4" Copper Union & 3/4"
3/4" reducing coupling &
Male Adapter & 3/4" x 2"
3/4" male adapter & (2)
copper nipple
3/4" x 2" copper nipple
3/4" PVC Pipe 1" PVC Pipe
Use PVC Primer & PVC Use PVC Primer & PVC
Pipe Cement per your Pipe Cement per your
local plumbing codes local plumbing codes
/4" MPT x 3/4" tube male 3/4" MPT x 1" tube male
3
adapter PVC Slip Type adapter PVC Slip Type
n/a n/a
3/4" PVC Union & 3/4" 1" PVC Union & 3/4" MPT
MPT x 3/4" tube male x 1" tube male adapter
adapter PVC Slip Type & PVC Slip Type & 1" x 2"
3/4" x 2" PVC nipple PVC nipple
3
1
2
3/4" PEX
You may need to consult You may need to consult
your local plumber - your local plumber -
requires special tools requires special tools
3/4" MPT x 3/4" CTS QC 3/4" MPT x 1" CTS QC
Adapter
(WATTS Water PEX) (WATTS Water PEX)
1" PEX
Adapter
V4.0