Cattani TURBO-SMART A Manual De Instrucciones página 34

Generated Code
This code is generated by Cattani S.p.A. Each unit is allocated
a unique code. This code needs to be supplied to Cattani to
purchase the password (Activation Code) to upgrade version
A (2 chair unit) to version B (4 chair unit).
Activation Code
Once purchased from Cattani S.p.A., this code is entered
at this point to upgrade version A (2 chair unit) to version
B (4 chair unit).
Press the Enter Key to make the cursor appear.
I
Use the keys to move the cursor. Enter the Activation
Code using the keys to increase or decrease the figure.
Press the I Enter Key again to confirm, then press to
go back to the User Parameters menu.
System Parameters Setup menu
To access this menu and/or make any changes, you are
required to enter the access password 0000456000 (see
instructions on page 30).
Vacuum set point
(Max.setting: 200 mbar)
To change any parameters in this menu:
Scroll with through to display the required parame-
ter.
Press the Enter Key to enable the cursor. The fi gure can
I
be changed using the arrow keys .
Once the fi gure has been set to the desired fi gure, press the
Enter Key again to confi rm and continue.
33