Residual Risks; Know Your Product; Symbols On The Product - Ryobi OHT1845 Traducción De Las Instrucciones Originales

Ocultar thumbs Ver también para OHT1845:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
preventative lubricant before refitting the blade
protector. The manufacturer recommends you to use
a rust-preventative lubricant spray to apply an even
distribution and reduce the risk of personal injury from
contact with the blades. For information about suitable
spray product, check with an authorised service centre.
Lubricate the blades lightly before use if necessary
using the above method.
Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
Injury caused by the blade
The blade cannot be guarded while cutting. Keep
the blade away from yourself and others. Cover
it with the blade protector whenever you are not
cutting.
Injury caused by vibration
Always use the right tool for the job, use designated
handles, and restrict working time and exposure.
Hearing injury caused by exposure to noise
Wear ear protection and limit exposure.
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness, and blanching of the fi ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
After each period of operation, exercise to increase
blood circulation.
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
4
| English

KNOW YOUR PRODUCT

See page 135.
1. Rear handle
2. Trigger
3. Front handle
4. Operator presence switch
5. Blade guard
6. Blade
7. Blade cover

SYMBOLS ON THE PRODUCT

Safety alert
Please read the instructions carefully
before starting the product.
Wear non-slip, heavy duty gloves.
Beware of thrown or fl ying objects.
Keep all bystanders, especially children
and pets, at least 15m away from the
operating area.
Wear ear protection.
Wear eye protection.
Always hold the hedge trimmer with
both hands when operating.
To prevent serious injury, do not touch
cutting blades.
Do not expose to rain or damp condition.
The guaranteed sound power level is
97
shown on this label by 97 dB.
Conforms to all regulatory standards in
the country in the EU where the product
is purchased.
EurAsian Conformity Mark
Ukrainian mark of conformity

Publicidad

Tabla de contenido
loading

Tabla de contenido