Staudte Hirsch SH-5.200 Instrucciones De Empleo página 5

GB
LED Portable Lamp SH-5.200
Article no. 552000
Intended use
The LED Portable Lamp SH-5.200 by Staudte Hirsch is a lighting solution for indoor
and outdoor applications, which was designed for extreme operational conditions. It
is suitable for use as work lamp, warning light as well as emergency lighting.
Scope of delivery
LED Portable Lamp SH-5.200

Charging cradle SH-5.900

Plug-in power unit

Car charging adapter

Instruction manual

Safety and warning instructions
The following safety notes and hazard warnings serve for the protection of both the
device and your health. So please read the following points thoroughly.
For safety and technical approval reasons (CE), any unauthorized conversion and/

or modification of the product is not permitted.
The SH-5.200 fulfils the requirements of the protection type IP 54 (complete

protection against contact, dust depositing on the internal surfaces and splashing
water from any directions). This is why you should never open the housing,
as this protection may no longer be guaranteed.
To avoid eye injury, never look into the light source or do not point the light

beam in the direction of persons or animals.
The use of the product under unfavorable environmental conditions must be

avoided. Unfavorable environmental conditions include: ambient temperatures
above 50 °C, flammable gases, solvents, vapors, dust, relative humidity in excess
of 80 %, and moisture.
If there is reason to believe that safe operation is no longer possible, the device
must be switched off immediately and secured against unintentional operation.
Service and repairs may only be carried out by authorized and qualified

personnel.
In case of improper handling or non-observance of these operating
instructions or the safety notes stated herein, the warrant/guarantee
shall lapse. We do not assume liability for any personal injury, damage
to property or subsequent damage that can be attributed to this.
/ 08 Designed in Germany. Powered by IVT.
Product description and features
The double beam technology of the Staudte Hirsch LED Portable Lamp SH-5.200 provi-
des an intensive and even illumination of your work space. It is equipped with a flood
light for broad illumination as well as a focus light for precise lighting.
Features:
2 x 8 W Cree XHP50 LED with 130 lm/W peak luminous efficacy

5 different lighting modes

8,000 mAh Li-ion battery

6 h duration of light at full, 11 h at half luminosity, 16 h in the flashing light mode

Up to 250 m light range

Handy and robust housing with IP 54

Solid rubber handle

Magnetic storage tray below the lamp head

Slip-proof base

Operation and display elements:
The SH-5.200 is equipped with an easy-to-use rotary switch, which can also be used
conveniently with gloves. In addition, 3 LEDs inform you about the charging status
of the rechargeable battery at any time.
1 2
Charging status
indicators
Full 100 %
Half 50 %
Low 25 %
Rotary switch
3 years manufacturer's warranty. Rechargeable batteries excluded.
3 4
Lighting modes
1
Off
2
Flood light, full luminosity
3
Flood light, half luminosity
4
Focus light, full luminosity
5
Focus light, full luminosity
6
Flashing light (flood light
at half luminosity)
6 5
More information at www.staudte-hirsch.de / 09