Special Features; Technical Data - Staudte Hirsch SH-5.200 Instrucciones De Empleo

GB
Charging and protection features
To provide optimum power supply the SH-5.200 is equipped with a Li-ion battery. It
is rechargeable and maintenance-free and distinguishes itself by low self-discharge.
Charging the battery:
To recharge the battery, use the charging cradle SH-5.900 included in the scope of
delivery. It is supplied with energy either via the plug-in power unit or the car char-
ging adapter, which is signaled by the green LEDs.
Place the Portable Lamp SH-5.200 in the charging cradle observing correct polarity.
The charging process is started immediately. If the red LEDs of the charging cradle
SH-5.900 are on, the SH-5.200 is being charged. If the green LEDs are on, it is indica-
ted that the battery is fully charged. The charging time is approx. 8 h.
Protection features:
The SH-5.200 is equipped with an overcharge protection for the rechargeable bat-
tery, which means that the lamp may be stored permanently in the charging cradle.
Due to the deep discharge protection the rechargeable battery is always protected
against damaging deep discharge to prolong its service life.
We recommend that you fully charge the battery before using the lamp for the first
time in order to make full use of its efficiency.

Special features

Emergency light function:

If the SH-5.200 is in the charging cradle, it switches off automatically due to the
integrated emergency light function in case of power failure. To use this function,
please proceed as follows:
1. Connect the charging cradle SH-5.900 to the power supply (green LEDs are on)
2. Place the SH-5.200 in the charging cradle with the correct polarity (depending
on the charging status the red or green LEDs light up)
3. Use the rotary switch to set the desired lighting mode for the emergency light
function (lamp will be off)
Checking the emergency light function:
Disconnect the charging cradle from the power supply to simulate a power
failure. The Portable Lamp now switches on automatically to the selected mode.
Using the lamp as warning light:

The SH-5.200 may be used as warning light by selecting the flashing light mode
and inserting the optionally available orange diffusing plate.
/ 10 Designed in Germany. Powered by IVT.

Technical data

Type of battery Li-ion battery
Capacity of the rechargeable 8,000 mAh
battery
Nominal voltage of the battery 7,4 V
Light sources 2 x Cree XHP50 LED
Power consumption (max.) 8 W
Light range Flood light
Flood light
Focus light
Focus light
Flashing light 50 %: approx.
Runtime 6 h at full luminosity
11 h at half luminosity
16 h in flashing light mode
Luminous flux 1,040 lm at full luminosity per LED
Lifespan of light source 50,000 h
Color temperature Daylight white (6,500 K)
Beam angle Focus light: 10°
Flood light: 90°
Lighting modes 5
Emergency light function Yes
IP protection IP 54
Plug-in power unit Input: 100 – 240 V AC / 50/60 Hz, max. 0.32 A
Output: 12 V DC, max. 1 A
Car charging adapter 12/24 V DC
Charging time approx. 8 h
Temperature range - 25 °C to + 50 °C
Deep discharge protection 6,2 V +/- 0,1 V
Overcharge protection 8,4 V +/- 0,1 V
Material ABS, PC, TPE plastic; aluminum
Color black, red
Dimensions (L x W x H) 192 x 115 x 222 mm (lamp), 150 x 164 x 53 mm (charging cradle)
Weight 1.25 kg (lamp) 0.30 kg (charging cradle)
Environmental protection note
At the end of its useful life, this product may not be disposed of together
with normal household waste, but has to be dropped off at a collection
center for the recycling of electrical and electronic devices. This is indi-
cated by the symbol on the product, on the instruction manual or on the
packaging. The materials of which this product is made are recyclable
pursuant to their labelling. With the reuse, the recycling of the materials or
other forms of scrap usage, you are making an important contribution to
the protection of the environment.
Please ask your local authorities for the appropriate disposal center.
Technical specifications subject to change. We assume no liability for typographical errors.
V01_12/2015
You can download the declaration of conformity for this product at staudte-hirsch.de or request
it from the IVT service-team.
IVT Innovative Versorgungstechnik GmbH, Dienhof 14, D-92242 Hirschau
Tel. +49 9622-719910, Fax +49 9622-7199120, info@ivt-hirschau.de, www.ivt-hirschau.de
3 years manufacturer's warranty. Rechargeable batteries excluded.
100 %: approx. 75 m
50 %: approx. 50 m
100 %: approx. 250 m
50 %: approx. 120 m
50 m
More information at www.staudte-hirsch.de / 11