Design Features; Mounting Instructions; English - SPX JOHNSON PUMP 32-57151-01 Manual De Instrucciones

Multiple Port Shower Sump
Security
• The shower sump may not be used for other liquid than water/bilge water.
• Always install the pump with black lead (-) and brown/white lead (+).
• Always use the fuse required, see "Design features" below.
• The wire connections must be sealed with a marine sealant.
• A ll electrical wiring must be clamped with the connections well above the bilge
water level. Do not remove the insulation more than necessary. All wiring
connections should be sealed with a marine sealant to avoid oxidation.
• Do not run dry.
Type designation
Multi Port Shower Sump
Multi Port Shower Sump

Design features

Container:
Lid:
Capacity,
straight:
Capacity,
1 m (3 ft) head: 53 l/min (13.6 V)
Check valve
Voltage:
Amperage:
Fuse size:

Mounting instructions

Fasten the shower sump to the hull by screws in the four mounting holes.
Operation
See illustration page 15.
1. When the bilge water rises and reaches the second detector cell at 50 mm (2")
the switch starts the pump, with a 3 second delay.
2. When the water level has sunk to a level of 20 mm (¾"), and the first detector
cell is above the water level, the pump is stopped.
Original instructions
12 V
24 V
Thermoplastic, white
Acrylic, clear
61 l/min (13.6 V)
Flapper valve, nitrile
12 V / 24 V DC
3.2 A/ 2 A
4 A / 3 A
art nr 32-57151-01
art nr 32-57151-02
Intake hose:
Discharge hose: 3/4"
Dimensions:
Weight:
1x3/4"
1x3/4" or 1x1"
1x1 / " or 1x1 / "
1 1
8 2
10.75"Lx8.26"Wx5.7" H
2,3 lbs (1.05 kg)
> English
5