Step 4 -Attach Center Reflector To Reflector Panel - Bond HYPH50061-50 Manual Del Usuario

Step 4 –Attach Center Reflector
to Reflector Panel. Figure 9
■ Remove protective cover
before assembling.Please see
Figure 8
■ Slide two reflector panels
together. Please see Figure
10
■ Insert one small screw and
screw on cap nut loosely.
Please see Figure 10
■ Slide reflector plate onto
reflector panels. Figure 10
■ Insert one small screw and
screw on cap nut loosely.
Figure 10
■ Repeat procedure to complete
the assembly of all four
sections. Fully tighten all of the
screws. Figure 9
Figure 8
Remove protective cover before assemble.
Figure 9
Figure 10
WARNING!
7
7