Dangers Which Could Arise Due To Non-Observance Of The Safety Instructions; Carrying Out Work In A Safety Conscious Manner; Safety Regulations For The Owner/Operator - Conel FLOW TPF Manual De Instrucciones

20
The presence of a dangerous voltage is identified with the safety symbol.
See DIN 4844-W8.
ATTENTION!
Applies to safety instructions, the non-observance of which could damage the unit or affect it's
functioning.
Symbols directly on the unit itself, e. g.
/ Nameplate
must be carefully observed and must be maintained in a legible condition.
2.1
Dangers which could arise due to non-observance of the
safety instructions
The non-observance of the safety instructions can lead to both danger to personnel and also to possi-
ble harm to the environment or the unit itself. Non-observance of the safety instructions can invalidate
the rights of the user to any compensation or redress.
In detail, non-observance can for example result in the following dangers:
/ Failure of important functions of the unit/installation
/ Danger to personnel by electrical, mechanical or chemical influences
/ Danger to the environment by leakage of dangerous substances
2.2

Carrying out work in a safety conscious manner

The safety instructions listed in this operating manual, the existing National Regulations for Safety, as
well as any internal operating or safety regulations which apply in the user's own premises must be
observed.
2.3

Safety Regulations for the owner/operator

All dangers due to electricity must be avoided (for details consult the regulations of
your local Electricity Supply Company).