McCulloch MC1255 Guia Del Usuario página 9

WALLPAPER REMOVAL
1. For best results, use a scoring tool or a putty knife and gently score the wallpaper in a criss-
cross patter before removal. The perforations will allow the steam to penetrate the wallpaper.
2. To remove wallpaper, hold the Wallpaper Remover flat against the scored wallpaper. Pull the
trigger and hold for 15-20 seconds (time needed may vary). Move the steam plate to a new
section and remove the steamed section with a scraper blade.
STEAM CLEANING TIPS - READ BEFORE STARTING
When using steam on delicate materials always check the suitability of materials before steam
cleaning. Steam is being generated at temperatures in excess of 212ºF (100ºC). DO NOT use
on any surfaces that cannot withstand this temperature. Always test in an area that is out of
view. DO NOT soak materials being cleaned. Too much steam can leave water marks or other
damage. Only a light application of steam is required.
Spot Treating:
• The Handheld Power Steamer may be used for treating light carpet and upholstery stains.
Note: Some upholstery and fabrics contain stain resistant treatments which may be
affected by steam cleaning. Check your upholstery manufacture for information.
• Try cleaning a small, unseen area of carpet, to verify any unusual effects on fabric. If so do not
try to clean light stains on carpet or upholstery.
Windows and Tiles:
• Antique and stained glass may be brittle and may crack under extreme temperatures.
• Do not use on glass when the temperature is below 32ºF (0ºC). Glass may crack in cold
temperatures.
• If your window has been treated or coated in any way, check with manufacturer before using
steamer.
ENGLISH | 9