Cleaning The Cooker Hood - Sirius SUNRISE SDD 13 Instrucciones De Uso Y De Montaje

CLEANING
THE COOKER HOOD
Careful maintenance ensures proper operation and good performances over time.
The hood must be disconnected from the electrical network, both by unplugging the appliance
from the socket and activating the magnetic circuit breaker (safety cut-out), before removing the
metal grease filters. After cleaning operations, replace the metal grease filters as outlined in the
installation instructions.
MAINTENANCE
External surfaces and
accessories
Active charcoal filter
22
CAUTION
HOW TO PROCEED?
Do not use metallic scrubbers, abrasi-
ve products, or hard brushes.
In the recirculation mode, the active
charcoal filter must be replaced perio-
dically.
To remove the charcoal filter first of all
Replacement of carbon filters: please
see section "Installation of grease fil-
ter – Installation of carbon filter".
EN
ACCESSORY PRODUCTS TO
To clean the external surfaces of the
cookerhood and the light housing
screen use only commercially avai-
lable household detergents diluted
in water. Then rinse with clean water
and dry with a soft cloth.
USE
S-DD13 SUNRISE