Dip-Switch Settings - CARLO GAVAZZI Guardian 1 Manual Original Del Usuario

Fig. 8
f. The sensor is now ready for operation.
Set up the DIP-switches to match the door controller.
DIP-switch 1 - Sensor test input
DIP-switch 2 - Safety output
DIP-switch 3 - Motion output
DIP-switch 4 - Direction recognittion
Bi-directional
DIP-switch 5 and 6
8

DIP-Switch Settings

Uni-directional
Doors remains
closed with cross
- traffic
Not in accordance with DIN18650 (prEN16005)
In accordance with DIN18650 (prEN16005)
Not valid (red LED flashes and output
relays are in safe mode)
Presence zone
Motion zone
Test card
Test input Active Low
Test input Active High
Normally closed (NC)
Normally open (NO)
Normally closed (NC)
Normally open (NO)
Bi-directional mode
Uni-directional mode
Uni-directional
Opens only when
approaching the
door