Cautions And Warnings - Health O Meter Professional 2600KL Instrucciones De Uso

CAUTIONS AND WARNINGS

INTENDED USE
This Health o meter
environment by trained medical staff. This product was designed to weigh patients who are safely seated in a
wheelchair or standing on the platform. Do not modify the product or use it for anything other than its intended
purpose.
To prevent patient/caregiver injury or damage to your scale, please follow the instructions in this
user manual very carefully.
 Do not exceed the weight capacity specified for this scale.
 For accurate weighing, this scale must be placed on a flat, stable surface.
 For accurate weighing, verify before each use the proper operation according to the procedure
described in this manual.
 Do not use in the presence of flammable or explosive materials.
 If the scale becomes damaged, it should not be operated until properly serviced.
 Do not transport the scale with a patient or object on the scale.
 To prevent injury and damage to your scale, do not drop or mishandle scale, during use or transport.
 Ensure that the AC adapter and scale do not come in contact with liquids, excessive temperature, or
excessive humidity.
Patient/caregiver safety
 This scale is designed for static weighing of patients only. No scale should be used for patient transfer.
 To prevent patient injury, the patient must be attended throughout the entire weighing event.
 Ensure the ramp and platform is kept clean and dry. Exercise caution when rolling the wheelchair onto
and off of the scale.
When operating the scale with the AC adapter:
 Operate this scale exclusively with the AC adapter that is provided (ADPT30). Use of an unspecified
adapter will void the warranty, and can pose a serious safety hazard.
 Prior to using this scale, inspect the AC adapter cord for cracking / fraying, or for broken / bent plug
prongs.
 Prior to using this scale, ensure that the AC adapter is plugged into an outlet with the rated voltage
appropriate for operation.
 Ensure that the AC adapter outlet is wired to a circuit breaker or other protected power source.
 Unplug the AC adapter, and carefully store both the adapter and adapter cord before moving the scale.
 Operating this scale at voltages and frequencies other than specified can damage the equipment and
will void the warranty.
When operating the scale with batteries:
 If the scale's battery icon indicates that the batteries are low replace the batteries or switch to the AC
adapter as soon as possible.
 When replacing / inserting batteries, be sure to use all new batteries.
This equipment has been tested and found to comply with the EMC limits for the Medical Device Directive
93/42/EEC (EN 55011 Class A and EN 60601-1-2). These limits are designed to provide reasonable
protection against harmful interference in a typical medical installation. The equipment generates, uses
and may radiate radio frequency energy and, if not installed and used in accordance with these
instructions, may cause harmful interference to other devices in the vicinity. There is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference with
other devices, which can be determined by turning the equipment off and on, the user is encouraged to try
to eliminate the interference by one or more of the following measures:

Reorient or relocate the receiving device.

Increase the separation between the equipment.

Connect the equipment into an outlet on a circuit different from that to which the other device(s) is
connected.

Consult Customer Service or a field service technician for help.
In no event shall Pelstar
P/N UM2600KL_ 2600KG_2610KL_2610KG_E_REV20190827_web
®
Professional wheelchair scale is intended to be used in a professional medical
®
, LLC be liable for damages or injuries whatsoever arising out of or connected with
the assembly, use, or misuse of its products.
3