Parameter / Cv - Trix 21236 Manual De Instrucciones

• The train has a technical feature in DCC operation in
which its lights will go on when the lighting function is
turned off and the train is stopped in a block.
CV Discription
1 * Adress
3 Acceleration delay
4 Braking delay
5 * Maximum speed
17 Extended address (upper part)
18 Extended address (lower part)
29 Bit 0: Travel direction polarity reversal
Bit 1: Number of speed levels 14 or 28/128
Bit 2: DCC Operation with braking Block.
DCC-, Selectrix- and DC power Operation
Bit 5: Adress size 7 bit / 14 bit
49 * Pulse width for motor control
50 * Rule variant
51 * Bit 0: Motor polarity reversal
Bit 1: Headlight polarity reversal
Bit 2: Track polarity reversal
* Changes done under Selectrix will automatically be carried out under DCC and vice versa.
*** The values for the desired settings must be added.
• When using a multiprotocol digital central unit as an
operating system, this locomotive should be controlled
with DCC format. The Selectrix digital central unit allows
Selectrix format to be employed.
DCC Value
CV 29, bit 5 =1
CV 29, bit 5 =1
Value
0 / 1
0 / 2 0, 1, 2, 3, 4, 5, 6, 7,
0 / 4 32, 34, 35, 36, 37,
0 / 32
0 / 1
0 / 2
0 / 4
Factory Setting
1 - 127 3
0 - 127 3
0 - 127 3
1 - 7 7
255
255
***
6
38, 39
0 - 3 0
0 - 3 3
0 - 7
4
9