Eneo VKC-1373/VAR210 Instrucciones De Instalación Y Funcionamiento página 6

5. Recommended circuit for local control
A. Connection diagram
The following functions can be configured and used:
B. PWB Layout
C. RS-485
6. Menu Description
6.1 Main Menu - General
Press the MENU button to access the GENERAL mode.
GENERAL DZOOM
AWB NEGA/POSI
AE HR MODE
D & N SHARPNESS
WDR MIRROR
PRIVACY FREEZE
MDT
COMM
INITIAL
EXIT
1. DZOOM
• Set DZOOM to the desired parameter using the LEFT or RIGHT button.
• DZOOM LEVEL: OFF, X2, X3, X4, X6, X8, X16
2. NEGA/POSI
• Select NEGATIVE/POSITIVE
3. HR MODE
• Set HR MODE (High Resolution Mode) to the desired parameter using the LEFT or RIGHT button.
• HR LEVEL: OFF; 1~7
4. SHARPNESS
• Adjust the Sharpness of the screen
5. MIRROR
• NORMAL: Deactivation
• MIRROR: Reverse turn Left or Right
• VERTICAL: Reverse turn Up or Down
• ROTATE: Rotate the screen to 180°
6. FREEZE
• Freezing the video frame
7. INITIAL
• Initializing GENERAL MODE
8. EXIT
• Return to MAIN MENU
2
1
GENERAL
DZOOM OFF
NEGA/POSI POSI
HR MODE OFF
SHARPNESS 7
MIRROR NORMAL
FREEZE OFF
INITIAL OFF
EXIT
6.2 Main Menu - AWB
Press the MENU button to access the AWB mode.
1. Set WB MODE to the desired mode using the LEFT or RIGHT button
A W B
WB MODE AUTO
RED CONT NOT USE
BLUE CONT NOT USE
PUSH AUTO OFF
INITIAL OFF
EXIT
WB is automatically set up between 2500K~9500K.
A W B
WB MODE USER
RED CONT 101
BLUE CONT 60
PUSH AUTO NOT USE
INITIAL OFF
EXIT
WB gains can be set by using RED CONT, BLUE CONT.
2. INITIAL
• Initializing AWB MODE
3. EXIT
• Return to MAIN MENU
6.3 Main Menu - AE
Press the MENU button to access the AE mode.
BRIGHTNESS
FLICKERLESS
SHUTTER SPD
AGC MAX SET
MAX FLD SET
INITIAL
EXIT
1. Set BRIGHTNESS to the desired mode using the LEFT or RIGHT button
• 0~60 BRIGHTNESS Levels can be adjusted.
2. Set FLICKERLESS to the desired mode using the LEFT or RIGHT button
• OFF: Deactivation
• ON: 1/120 (PAL models), 1/100 (NTSC models)
3. Set SHUTTER SPD to the desired mode using the LEFT or RIGHT button
• Day & Night AUTO TYPE: NOT USE
• Day, Night, EXT, CDS TYPE
• NORMAL: Deactivation
• X250, X500, X1000, X2000, X4000, X8000, X10000 (ex: X250 <- 1/2500sec)
4. Set AGC MAX SET to the desired mode using the LEFT or RIGHT button
• Day & Night AUTO TYPE: NOT USE
• Day, Night, EXT, CDS TYPE
• AGC OFF: Deactivation
• LOW: Gain is increased or decreased from 0 to 10dB automatically according to the illumination.
• MID: Gain is increased or decreased from 0 to 20dB automatically according to the illumination.
• HIGH: Gain is increased or decreased from 0 to 30dB automatically according to the illumination.
5. Set MAX FLD SET to the desired mode using the LEFT or RIGHT button
• OFF, 2FLD~20FLD, 40FLD, 80FLD, 160FLD (SLOW SHUTTER)
6. INITIAL
• Initial AE MODE
7. EXIT
• Return to MAIN MENU
A W B
WB MODE HOLD
RED CONT NOT USE
BLUE CONT NOT USE
PUSH AUTO OFF
INITIAL OFF
EXIT
If PUSH AUTO is selected as ON, it fixes up the value
setting the current WB.
A W B
WB MODE CRS
RED CONT NOT USE
BLUE CONT NOT USE
PUSH AUTO NOT USE
INITIAL OFF
EXIT
Color rolling suppress (CRS) mode:
The colour rolling phenomenon that occurs when
there is a slight offset between the bright / dark
frequency of a non-inverter fluorescent light and the
drive frequency of the CAMERA.
A E
25
NOT USE
NOT USE
NOT USE
2 FLD
ON