Eneo VKC-1373/VAR210 Instrucciones De Instalación Y Funcionamiento página 7

6.4 Main Menu - D&N
Press the MENU button to access the D&N mode.
D & N
D/N MODE AUTO
LEVEL MID
FILTER DLY 5
BURST ON
INITIAL ON
EXIT
1. Set D&N MODE to the desired mode using the LEFT or RIGHT button
• AUTO (AGC): DAY & NIGHT AUTO Mode
DAY: Only Day
NIGHT: Only Night
EXT, CDS: External or CdS Day & Night Mode
2. Set LEVEL to the desired mode using the LEFT or RIGHT button
• AUTO AGC TYPE • CDS SENSOR TYPE
MID: Normal LEVEL 1: Day –> Night: 21Lux, Night –> Day: 80Lux
HIGH: Dark LEVEL 2: Day –> Night: 10Lux, Night –> Day: 21Lux
AGC LEVEL FIX LEVEL 3: Day –> Night: 8Lux, Night –> Day: 14Lux
LEVEL 4: Day –> Night: 5Lux, Night –> Day: 10Lux
LEVEL 5: Day –> Night: 2Lux, Night –> Day: 4Lux
3. Set FILTER DLY to the desired mode using the LEFT or RIGHT button
• According to user's need, the turning delay time of 0~15 seconds can be given.
4. Set BURST to ON/OFF using the LEFT or RIGHT button
• Night Condition Color Burst ON/OFF
5. INITIAL
• Initializing D&N MENU
6. EXIT
• Return to MAIN MENU
6.5 Main Menu - WDR
Press the MENU button to access the WDR mode.
WDR MODE
WDR LEVEL
BACK LIGHT
BLC LEVEL
INITIAL
EXIT
1. Set WDR MODE to the OFF/ON/AUTO using the LEFT or RIGHT button
2. Set WDR LEVEL to the desired mode using the LEFT or RIGHT button
• Adjust the brightness level in WDR mode. (Parameter: 0~15)
3. Set BACK LIGHT to ON/OFF using the LEFT or RIGHT button
4. Set BLC LEVEL to the desired mode using the LEFT or RIGHT button
• 0~15 Ranged and adjust BLC Gain.
5. INITIAL
• Initializing WDR MENU
6. EXIT
• Return to MAIN MENU
6.6 Main Menu - PRIVACY
Press the MENU button to access the PRIVACY mode.
AREA
MASK
START X
END X
START Y
END Y
INITIAL
EXIT
1. Set AREA to the desired mode using the LEFT or RIGHT button
2. Set MASK to the desired mode using the LEFT or RIGHT button
• Masking the area on the screen in state of ON
3. Set START X to the desired mode using the LEFT or RIGHT button
• indicates the starting point of X axis
4. Set END X to the desired mode using the LEFT or RIGHT button
• indicates the ending point of X axis
5. Set START Y to the desired mode using the LEFT or RIGHT button
• indicates the starting point of Y axis
6. Set END Y to the desired mode using the LEFT or RIGHT button
• indicates the ending point of Y axis
7. INITIAL
• Initializing PRIVACY MODE
Your camera provides automatic mode changeover by
AGC sensing day or night conditions. It changes to colour
mode in day condition for optimal colour and to BW mode
in night condition for clear identification.
W D R
OFF
4
OFF
10
ON
PRIVACY
1
OFF
OFF
8. EXIT
• Return to MAIN MENU
NOTE: If MASK is not ON in setting AREA, data on X, Y coordinates cannot be used.
6.7 Main Menu - MDT
Press the MENU button to access the MDT (MOTION DETECT) mode.
DETECT AREA
DETECT MODE
SENSITIVITY
INITIAL
EXIT
1. Set DETECT AREA to the desired mode using the LEFT or RIGHT button.
• AREA LIST: LOW, CENTER, LEFT, RIGHT, WHOLE, UP
2. Set DETECT MODE to ON/OFF using the LEFT or RIGHT button.
WHOLE
LEFT
3. Set SENSITIVITY to the desired mode using the LEFT or RIGHT button.
• 0~15 Ranged and adjust the sensitivity in MDT mode.
4. INITIAL
• Initializing MDT MENU
5. EXIT
• Return to MAIN MENU
6.8 Main Menu - COMM
Press the MENU button to access the COMM (COMMUNICATION) mode.
ID DISPLAY
CAMERA ID
ZONE DISP
ZONE LABEL
PROTOCOL
VERSION
INITIAL
EXIT
1. Set CAMERA ID to ON/OFF using the LEFT or RIGHT button.
2. CAMERA ID
• Set CAMERA ID to the desired parameter using LEFT or RIGHT button.
• Press the MENU button to display the COMM and move the arrow indicator to CAMERA ID using the TELE or
WIDE button.
• If the CAMERA ID feature is set to ON, the name will be displayed on the monitor.
3. Set ZONE DISP to ON/OFF using the LEFT or RIGHT button.
4. ZONE LABEL
• You can enter up to 10 characters.
• Move the cursor to character - enter location by using the LEFT (NEAR) or RIGHT (FAR) button.
• Select the desired character by using TELE or WIDE button. The factory default characters are:
A~Z, a~z, 0~9, ~, !, #, *, -, +, /,:, ;, ?, ., ", _, (,), &, %.
• MENU: Return to COMM MENU
NOTE: If the COMM MENU feature is set to ZONE LABEL – ON, the name will be displayed on the monitor.
UP/ON - CHAR SELECT
LE/RI - POSITION
MENU - EXIT
5. Set PROTOCOL to DEF or P/D using the LEFT or RIGHT button.
• DEF: CNB PROTOCOL
• P/D: PELCO-D PROTOCOL (2400bps)
6. VERSION
• Camera Version
7. INITIAL
• Initializing COMM MENU
8. EXIT
• Return to MAIN MENU
M D T
LOW
OFF
9
ON
UP
CENTER RIGHT
LOW
C O M M
ON
001
ON
SET
P/D
VER X.X
ON
ZONE LABEL