Festo CPX-FB38 Manual De Instrucciones página 18

Warning
Switch off the power supply before you install or
remove the bus node (risk of functional disturbances or
damage).
Removing:
Remove the screws and pull the bus node away
S
carefully.
Mounting:
1. Check seal and seal surface.
2. Carefully insert connection sub−base into the manifold
sub−base and press it in.
3. Screws must be placed so that the existing threads can
be used. Tighten the screws by hand in a diagonally
opposite sequence. Tightening torque: 0.9
Please note
Depending on the material of the manifold sub−base
(metal or plastic), always use screws appropriate to the
manifold sub−base:
Plastic manifold sub−base: thread−cutting screws
Metal manifold sub−base: screws with metric thread
18
1.1 Nm
Festo CPX−FB38 0804NH English