Installation Instructions - Festo CPX-FB38 Manual De Instrucciones

Normal operating status:
The LEDs Run, PS and PL are lit green; the LEDs L/A1
and L/A2 are lit or flash green (when the connection is
used); the LEDs Error and SF are not lit.
The LED M is lit or flashes only when the paramerization
changed or forcing setting are active.
3

Installation instructions

3.1 Installation/removal
The bus node in the installed condition is located in a
manifold sub−base of the CPX terminal.
1
TORX T10 screws;
tightening torque
0.9 1.1 Nm
2
CPX bus node
3
Manifold sub−base
with contact rails
Festo CPX−FB38 0804NH English
1
2
3
17