Power Connection - SOUNDMASTER UR 140 Manual De Instrucciones

STANDBY Indicator
PM Indicator
ALARM 1 Indicator

POWER CONNECTION

Plug the AC power cord to a household outlet AC source. This unit is equipped with a
battery back up system, it requires a 3V CR2032 flat lithium battery (not included).
Insert the battery in the battery compartment, making certain that the positive and
negative (+ and -) battery terminals are attached to the corresponding terminals on the
plate in the battery compartment. If an AC power failure occurs, the clock automatically
switches to the battery power supply, the clock and timer memory continue running.
When the AC power resumes, the clock switches back to AC again.
GETTING STARTED
1. TIME AND CALENDAR MANUAL SETTING
A. Setting Time and Calendar – Press set button (7) in normal mode and keep
depress over 2 seconds to enter time set mode, after enter the setting mode, press
set button (7) to change the mode cycle as follows :
Normal → Year → Month → Day → 12/24 H → Real time Hour → Real time Min →
Normal
Action (during data adjustment):
Press << / Tune - button (8) to adjust data backward.
-
Press >> / Tune + button (12) to adjust data forward.
-
Keep depress << or >> button for 2 seconds to enable auto forward.
-
B. Setting Alarm 1 and Alarm 2 – Press alarm set button (9/13) during normal mode
and keep depress over 2 seconds to enter alarm set mode, after enter the setting
mode, press alarm set button (9/13) to change the mode cycle as follows :
Normal → AL 1 Hour → AL 1 Min → AL 1 weekday Alarm → AL 1 wake beep → AL 1
wake radio → AL 1 wake radio volume →Light → Light intensity → Normal.
Normal → AL 2 Hour → AL 2 Min → AL 2 weekday Alarm → AL 2 wake beep → AL 2
wake radio → AL 2 wake radio volume →Light → Light intensity →Normal.
LED DISPLAY
TIME Indicator
MH Indicator z
ALARM 2 Indicator