ENGLISH
AC-DC adaptor connection :
The clock radio unit can be powered by an external AC-DC adaptor, required the output
DC 5V 1000mA (included)
POWER CONNECTION
Plug the AC power cord to a household outlet AC source. Connect the adaptor's DC
output plug to the DC-IN Jack of the clock unit. This unit is equipped with a battery back
up system, it requires a 3V CR2032 flat lithium battery (not included). Insert the battery in
the battery compartment, making certain that the positive and negative (+ and -) battery
terminals are attached to the corresponding terminals on the plate in the battery
compartment. If an AC power failure occurs, the clock automatically switches to the
battery power supply, the clock and timer memory continue running. When the AC power
resumes, the clock switches back to AC again.
GETTING STARTED
Press the RESET button (24) locates on the back of unit after AC plug in.
The unit will display full segment for 2 seconds, then it will enter the normal mode.
-
1.
TIME AND CALENDAR MANUAL SETTING
ENG 2