Wiseup W4000 Manual De Instrucciones página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
5.1. Power off the camera, unscrew the knob cover and connect the camera to your proper PC
computer USB port using the USB cable provided.
5.2. The camera will be recognized as a removable disk drive.
5.3. Click on the drive in the root directory and inside the root directory, open the file named
"time.txt".
5.4. Write the current date and time in the "time.txt" file with the correct format:
YYYY-MM-DD HH:MM:SS Y (For example: 2017-04-12 14:24:32 Y). If you don't need the time
stamp on the video footage, you can change "Y" into "N" in the "time.txt" file. (For example:
2017-04-12 14:24:32 N). Save this file.
5.5. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Power off the camera, unscrew the knob cover and connect the camera to an outlet AC
power supply using the DC5V power adapter and the USB cable provided.
6.2. During the charging process, the blue indicator light will keep flashing slowly while the red
one stay illuminated.
6.3. It will take 2.5 hours to obtain a full charge.
6.4. When the camera is fully charged, both red and blue indicator lights will stay illuminated.
VII. Resetting
If for any reason, the camera stops responding or isn't working properly, a quick reset will
restore it back to normal operation.
Operation: When the camera is powered on, press the Power Button and Mode Button simul-
taneously once; the camera will shut down automatically. Then you can restart the camera with
factory default settings.
VIII. Time Setting
8.1. Pull the Time Adjustment Knob until you hear a click. Both hour and minute hands will be
stopped.
8.2. Rotate the Time Adjustment Knob to set time.
8.3. Push the Time Adjustment Knob back after the time set is completed.

Publicidad

Tabla de contenido
loading

Tabla de contenido