Suzuki 99000-99008-100 Instrucciones De Instalación página 10

10/10
4. Fix the LED Turnsignal A back
onto the Rear frame cover by
using Washer E and Nut D
firmly.
5. Connect the Lead Wire B to
the LED Turnsignal.
Connect the Lead Wire B to
the vehicle harness.
(black coupler ---> right, gray
coupler ---> left)
Be sure that the right and left LED turnsignal blink and hazard blink
operate normally.
If operation is OK, install the Rear frame cover and the Sport carrier in
the reverse order of removal.
NOTE: Adjust the right and left
GENUINE SUZUKI ACCESSORIES
turnsignal to be the same
direction. (90 degrees to
the ground)
Right side
Nut Nut
Washer Washer
LED Turnsignal LED Turnsignal
Lead Wire Lead Wire
Black coupler (RH) Black coupler (RH)
Gray coupler (LH) Gray coupler (LH)