3. Install the Overflow Ell
Using lubricant (not provided), lubricate the two O-rings on the
overflow ell.
Slide the O-rings into the grooves on the overflow ell.
Apply additional lubricant to the O-rings and the area
surrounding the O-rings.
Slide the overflow tube over the bottom end of the overflow ell.
Attach the washer to the overflow ell.
Apply a ring of plumbers putty or other sealant to the front side
of the washer according the putty manufacturer's instructions.
Align the overflow ell with the overflow hole in the bath.
Thread the lock ring on the overflow ell until hand-tight.
1054248-2-B
Lock Ring
Gasket
Overflow Ell
Overflow
Tube
6
Kohler Co.