Publicidad
Idiomas disponibles
Idiomas disponibles
BICYCLE CHILD CARRIER
TOOLS REQUIRED
FOR ASSEMBLY
Two Adjustable Wrenches
IMPORTANT
SAFETY INFORMATION
WARNING: Failure to follow each of the following
instructions can result in injury to your child.
1. Read all the instructions before assembling or
using the Bicycle Child Carrier.
2. For snug but comfortable fit see that the Quick-
Release buckles are fastened properly and that
straps are adjusted correctly. Test shoulder slack
by pulling the straps away from child's chest. They
should not move by more than one inch.
COCOON 300
™
INSTRUCTION MANUAL
AND SKIPPER
™
3. In the event that the child carrier is involved in an
accident, check to be sure that it functions properly
before it is used again. Check for structural damage
and replace the seat if it is damaged.
CAUTION
1. Only children who are able to hold their head up-
right while wearing a bicycle helmet (approximately
1 year old) and are not over 40 pounds should be
passengers in a child carrier
2. Make sure bicycle is stable and under control
when loading and unloading child
3. Stability of the bicycle is affected by the weight of
the child in the carrier
4. Child should always wear a bicycle helmet which
complies with the CPSC 1203 standards
5. Never leave child unattended
6. Never leave the child in the carrier with only the
kickstand supporting the bicycle
7. The bicycle rider should avoid busy streets and bad
weather and ride with extra care and reduced speed
8. When walking bicycle, hold carrier with one hand
and handlebar with the other
9. Before each use check to be certain carrier and
hardware are intact and secure
10. Make sure carrier does not interfere with braking
or pedaling
11. Do not use the seat if any component is broken
or if the straps or other components show signs of
significant wear
12. Do not modify the seat or the restraint system
13. Discard and destroy after five years of use
Publicidad
