Bell BICYCLE CHILD CARRIER Manual De Instrucciones página 9

STEP 20
Remove the male end of the quick-release buckle.
STEP 21
Thread the lap belt through the holes in the seat.
STEP 22
Reinstall the male end of the quick-release buckle
and pull on the strap to confirm that the strap locks
in the buckle.
STEP 23
Pass each of the two top butterfly ends of the
3-point harness through the holes in the seat and
through the holes in the seat pad.
STEP 24
Attach the bottom end of the 3-point harness
through the center hole in the bottom of the seat.