Publicidad
Idiomas disponibles
Idiomas disponibles
Hydrajaws® Safety Lifeline Tester
It is essential that the operating instructions are read before the tester is operated for
the first time.
Always keep these operating instructions together with the tester.
Ensure that the operating instructions are with the tester when it is given to other
persons.
Pull out tester (Figure 1)
1.
Handle grip
2.
Operating handle
3.
Quick release coupling when fitted or gauge (3)
4.
Movement or displacement indicator scale
5.
Load Jaw
6. Hexagon operating nut
Warning! Read the instructions before use!
The numbers refer to the pictures which can be found on the foldout cover pages.
Keep these pages open while you read the operating instructions.
CONTENTS
Description
General Operating Instructions
General Guidelines for testing
600mm Load Spreading Bridge
Care of Tester
DESCRIPTION
The Safety Lifeline tester is a purpose
made system for testing 8mm, 10mm,
12mm 3/8", ½" cable connections.
It consists of a mechanical screw
arrangement acting through a hydraulic
load cell, which measures the load
applied to the cable connection directly.
The cable test frame requires the model
2000 tester meter with minimum 20kN
gauge to operate it.
A comprehensive range of accessories
is also available, further increasing the
scope of possible testing applications.
USE OF THE TESTER AS DIRECTED
1
The tester is intended for use by skilled
3
personnel with the appropriate training
4
and knowledge of the applicable safety
5
precautions.
5
SAFETY RULES
•
Modification of the tester or
tampering with its parts is not
permissible.
•
Observe the information printed in
the operating instructions applicable
to operation care and maintenance.
•
The tester and its accessories
may present hazards when used
incorrectly by untrained personnel or
not as directed.
•
Use only the genuine Hydrajaws
accessories or ancillary equipment
listed in the operating instructions.
GB
GB
Publicidad
