Start Scheduled On/Off; Set On/Off Schedule - Pandigital PI8004W01 Guia Del Usuario

1.
On the Calendar/Clock screen, press MENU.
2.
Use ▲ / ▼ to highlight Set Alarm and then press ENTER.
3.
Use ◄ / ► to move between the Time, OFF/Once/Daily, and
Tone/Music fields, and use ▲ / ▼ to change the value in the selected
field.
4.
When the alarm is set as desired, press ENTER to save and return to
the normal Calendar/Clock screen.
5.
A small alarm clock will be displayed in the lower right corner.
Depending on the alert tone you selected, (default tone) a small
speaker symbol (default tone) or (music) a music note symbol will
also be displayed next to the little clock.
Note: At least one MP3 music file must be present in the internal memory
for the alert to play music. If you set the alert to play Music and
there is no MP3 music file present on the selected memory source,
the default tone will sound instead.
6.
When the alarm sounds, press any key on the remote control or the
buttons on the top of the DPF to stop it and return to the
Calendar/Clock screen.
7.
To cancel the alarm before its scheduled time, follow steps 1-3 above
and set the schedule to OFF.
TIP: Be sure to have the Calendar/Clock screen displayed and

Start Scheduled ON/OFF

Refer to Activate Scheduled Slideshows on page 27 for instructions.

Set ON/OFF Schedule

Refer to Schedule a Slideshow on page 27 for instructions.
33
the DPF's volume turned up when you want to use the Alarm
Clock.