Attach the inlet adapter to the machine's
water inlet. Hand tighten only.
Attach garden hose to water supply and
turn water on.
Completely unwind power cord and plug
the unit into an outlet.
ON
Turn the switch to the ON position ("I").
34
7
Attach a hose with a quick connect coupling
to the high pressure washer.
9
OFF
Make sure the ON/OFF switch is on the
OFF position ("0").
11
Depress trigger until there is a steady
stream of water.
13
Drain unit after each use (for
storage): remove water
connection, turn ON the machine
for a few seconds and press gun
trigger to bleed remaining water
Turn OFF immediately.
CAUTION!
in the pump.
8
10
12