Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTIONS
Connections on pressure washer hoses; gun and spray wand should be cleaned
regularly and lubricated with non-water soluble grease.
SPRAY TIPS ONLY
Clogging of the spray tips causes the pump pressure to be too high and cleaning is
immediately required. You can clean the spray tips by carefully inserting the needle,
or a thin, sharp instrument (i.e. paperclip) into the tip to rid it of deposits.
WATER FILTER SCREEN
The pressure washer is equipped with a water inlet screen to protect the pump. If the
screen is not kept clean, the flow of water to the pressure washer will be restricted
and the pump may be damaged.
01
To clean inner water screen, remove quick-connector and remove the filter screen
from the pump inlet.
02
Rinse screen until it is free of debris and blockage.
Replace screen and quick-connector immediately to prevent any foreign matter
03
from entering the pump.
When storing your High Pressure Washer, a few simple steps are essential for
maintaining a longer life of the product.
• Always store it in a place protected from sun and moisture.
• Never bend the hose, just wrap it for storage.
• Do not put any weight on the hose or fittings, and try to store them always clean,
because wet dirty may dry causing the clogging of accessories.
FAQ (FREQUENTLY ASKED QUESTIONS)
1. I don't know how to activate the detergent function
To activate the detergent function of your washing machine, you simply fill the
detergent dispenser and connect the black nozzle to the lance.
2. The washer turns on and off, even if you keep the trigger pressed;
If you notice that the washer is the motor turning on and off even when you hold
the trigger down, make sure all the false air contained in the hose was released, this
may cause malfunction of the pump. Also check if there is any leak in your washer.
38
CLEANING AND MAINTENANCE
STORAGE
Publicidad
Tabla de contenido
