Famastil F-POWER LV2000-i Manual De Instrucciones página 36

Working with detergent, you ensure a faster dirt removal.
To increase the efficiency of detergent, apply it on dry surfaces.
Make sure that the detergent dispenser is filled with neutral liquid detergent
recommended for use in washing machines. To activate the soap function, attach the
black nozzle to the metal lance and fill the compartment as instructed below:
CAUTION! Only use cleaning detergents recommended for
01 Lock the trigger to avoid accidentally
turn on the high pressure washer.
Turn on the pressure washer. Pull trigger to operate unit. The liquid detergent will
04
automatically mix with water, and be discharged through the nozzle at low pressure.
Apply detergent to a DRY work surface, from bottom to top.
Allow detergent to remain on the surface for a short time before rinsing. Do not
05
allow detergent to dry on surface.
Rinse with clean water under high pressure. On a vertical surface, rinse from the
06
bottom up, then rinse from the top down to avoid streaking. Hold nozzle 6-8" (15-20
cm) from the work surface, at a 45° angle.
07 When you have finished using the detergent injection system, fill detergent bottle
with clean water. Siphon water at low pressure for one minute, so that all detergent
is flushed through system. Remove detergent bottle, and rinse it thoroughly.
36
WORKING WITH DETERGENTS
pressure washers.
16
18
02 Attach the black nozzle to the metal
lance.
03 Remove the lid and place
19
the detergent. Close the
lid. It is advisable to supply
the compartment with 50%
detergent and 50% water,
as this will cause the foam
to create while leaving the
compartment. Firstly fill the
compartment with detergent,
than put the water.
17