Escalade Sports prince SPORT T8830 Instrucciones De Ensamblaje página 4

Table top can be set on two saw horses. Although this will make
assembly easier it is not necessary to complete assembly. Always use
shipping container to protect the painted surface of the table top.
CAUTION: Make sure that the table top is secure on the
CAUTION:
ASSEMBLY TIP
sawhorses and NEVER leave the table top unattended.
1. Lay table top #1 painted side down, on a smooth, flat
surface. Use the shipping container to protect the
painted surface of the table top.
2. Align U-Support (#7) and U-Leg (#2) on Table
Top as shown in Figure 1.
NOTE: "U-Leg" (#2) is larger and Wider
than the "U-Support" (#7). The U-Leg
should be installed on the end of the table
half with the end rail mounting holes.
3. Put plastic caps (#13) on the end of
U-Leg (#2). See Figure 1.
ASSEMBLY TIP
The following pages will have a picture of the
Hardware Needed (to scale) along with the
Quantity, Key# and Description. You can lay the
hardware on the picture to identify the hardware.
13
(U-Support)
4
Note: Indentations are
(U-Leg)
small so look closely.
2
End Rail Mounting
Figure
1
7
Note: Indentations are
small so look closely.
Indentations
1