TACTICAL GUN REST ASSEMBLY
For mounting the tactical gun rests in the center compartment, rst install the
two brackets on the rear wall of the cabinet using (3) type "D" thread forming
screws for each bracket as shown. Notice there is a top to each bracket which
must be in the position shown.
Thread Forming Screw
D
Top of
bracket
Cover each exposed screw thread with
the type "F" caps included in the
hardware bag.
is assembly is easier with two people.
D
F
You can mount the tactical gun rests now
or a er you mount the cabinet to the wall.
Select a location on the bracket for your
tactical gun rests. Temporarily place the
tactical stock rest as shown to help
determine the height of the gun rest.
NOTE: Some bracket positions may not
be used because of interference with the
mounting screws or top shelf.
Slightly angle the tactical
gun rest upward and hook
the tab into the bracket.
Lower the tactical gun rest so the back
of the rest is ush with the bracket.
Secure the barrel rest to the bracket
with one of the type "C" screws
included in the hardware bag.
C
4
27
40350-1309