Publicidad
Idiomas disponibles
Idiomas disponibles
FOAM PLACEMENT
Place the foam pads on the shelves and bo om as shown.
cut out piece may be used if the tactical stock rest is not used or may be cut to
produce a smaller piece to ll in behind the stock rest.
Put your tactical guns in place to determine the best location for the stock rest
in the bo om of the center compartment. Peel away the adhesive backing and
press the stock rest into place.
SCOPE STANDOFF ASSEMBLY
e scope stando s can be mounted in the front (2) positions of the barrel
e bo om foam
rests located on the le or right side. Use a type "B" screw and assemble the
stando to the barrel rest as shown.
Insert the plastic plugs in the cabinet's top mounting holes if you are not
installing the Tactical Gear cabinet on the top the security cabinet.
Assemble the cabinet to suit your storage needs and load the cabinet
with your guns and equipment. If you are satis ed with your cabinet
con guration, proceed with mounting the cabinet to the wall and the
oor as described later in these instruction.
B
6
27
40350-1309
Publicidad
