Descargar Imprimir esta página

Selecting A Location - STACK-ON TC-16-GB-K Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

SELECTING A LOCATION

e cabinet must be mounted to wall studs and the oor. For
optimal safety and security, the cabinet should be installed adjacent
to the side wall of a closet with minimal space on either side of the
cabinet, in an isolated, dry and secure area.
at against the wall at the back of the unit, as well as at on the oor.
Remove the baseboard if necessary.
THE CABINET SHOULD ALWAYS BE KEPT OUT OF
THE REACH OF CHILDREN.
16"
CENTERS
CABINET
TOP VIEW
MINIMUM
e cabinet should be
SECURING THE CABINET
FIRST ASSEMBLE ALL THE INTERNAL CABINET
COMPONENTS TO SUIT YOUR STO
LOADING THE CABINET WITH YOUR GUNS AND
EQUIPMENT. IF YOU ARE SATISFIED WITH YOUR CABINET
CONFIGU
TION, PROCEED WITH MOUNTING THE
CABINET TO THE WALL STUDS AND THE FLOOR AS
DESCRIBED BELOW.
NOTE:
is cabinet must be mounted to wall studs and the
oor. Failure to do so will compromise the safety and security
of the cabinet.
NOTE:
e cabinet must be secured to wall studs in the top holes
in the back of the cabinet so that it is anchored to the wall studs in
two locations.
e cabinet must also be mounted to the oor. Use
the hardware provided or consult your hardware retailer for
fastening hardware for your particular mounting surfaces
Drill (2) 3/16" pilot holes into the wall studs lining up with the top
(2) mounting holes in the back of the cabinet. Secure the cabinet to
the wall using (2) lag bolts and washers.
Drill (2) pilot holes and secure the cabinet bo om to the oor with
(2) lag bolts and washers (E).
E
IMPORTANT
Keep keys in a secure place, away from children. Keep this record of your key
number in a secure place separate from your cabinet. To order a replacement
key set, follow the instructions on the a ached form.
STACK-ON PRODUCTS COMPANY
P.O. BOX 489
WAUCONDA, IL 60084
GE NEEDS AND TRY
7
27
40350-1309

Publicidad

loading