Lenze Smart Motor m300 Instrucciones Para El Montaje página 27

Application as directed
The Lenze Smart motor
¯ is a component for the installation into a machine for horizontal materials
handling technology.
¯ must only be operated under the operating conditions prescribed in this
documentation.
¯ complies with the protection requirements of the "LowVoltage" EC Directive.
¯ is not a machine in terms of the EC Machinery Directive.
¯ is not a household appliance, but is solely designed as component for the
re−utilisation for industral use or professional use in terms of EN 61000−3−2.
Commissioning
¯ If required, you have to equip the system with additional monitoring and
protective devices in accordance with the respective valid safety regulations (e. g.
law on technical equipment, regulations for the prevention of accidents).
Safety functions
¯ Without a higher−level safety system, the described product must neither be used
for the protection of machines nor persons.
Maintenance and servicing
¯ Only the bearings and shaft sealing rings become worn.
–
Check bearings for noise (after approx. 15,000 h at the latest).
¯ In order to prevent overheating, remove dirt deposits on the drives regularly.
¯ We recommend carrying out an inspection after the first 50 operating hours. In
this way, you can detect and correct any irregularities or faults at an early stage.
Disposal
¯ Recycle or dispose of the product according to the applicable regulations.
Lenze ¯ MDKSEMA ¯ 5.0
Safety instructions 1
EN
27