INSTALLATION
4
Lightly grease support tube of Extension Arm.
Feed guide string and insert Extension Arm into
5
opening at top of Wall Support.
By using the nut and lock washer supplied, con-
6
nect one side of the protective ground wire (b) to
the ground point of the Extension Arm, then con-
nect the other side to the earth screw of Wall
Support.
Loosen two friction screws (c) of Extension Arm.
7
Remove round snap-out covers (d) at both ends
of Extension Arm (see figure in the previous page).
B-10
Printed on: 22 Mär 2012, 09:28:10 am; Printed by: TOBIAS BAUER
grease here
ground point of the Ext. arm
b
earth screw of the Wall Support
(c)
Gendex Dental Systems
ORALIX AC SYSTEM