Troubleshooting - Krups BeerTender Manual Del Usuario

1-B90 oneway Amsterdam_UK_1-B90 oneway Amsterdam_UK.qxd 30/05/13 13:57 Page19

12 troubleshooting

Problem Possible causes
The appliance The appliance is
does not turn not connected to
on. the mains power
supply.
You can not fit The BeerTender
the BeerTender Keg tap has been
Keg tap in the activated by hand.
tapping unit.
You can not The BeerTender
close the tap Keg tap is not
cover. inserted correctly.
No beer is The BeerTender
being Keg is empty (last
dispensed. level of volume
indicator is blinking).
There is no keg
inside the
BeerTender
appliance (the
4 levels of the
volume indicator
are blinking).
The BeerTender
appliance tap
handle is not
correctly
installed/positioned.
The The BeerTender
BeerTender Keg has not
appliance reached the right
produces too dispensing
much foam temperature.
when
dispensing
beer (see also
chapter 7:
Dispensing
beer).
19
remedies
Connect the
appliance to the
power supply.
Put the BeerTender
Keg tap back in its
original position.
Remove the
BeerTender Keg
tap from the
appliance and fit it
again following
chapter 6 – Using
the BeerTender.
Replace the
BeerTender Keg
with a new one.
Install a keg inside
the BeerTender
appliance.
Install/position the
tap correctly.
Allow the
BeerTender Keg to
cool to the right
temperature. You
can rely on the
temperature
indicator on the
control display of
your BeerTender
appliance.