Descargar Imprimir esta página

Culligan IC-100A Instrucciones De Instalación Y Funcionamiento página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Performance Data
Important notice
Read this performance data and compare the capabilities of this system with your
actual water treatment needs. It is recommended that, before installing a water
treatment system, you have your water supply tested to determine your actual
water treatment needs.
This system has been tested by WQA according to NSF/ANSI Standard 42 for
reduction of the substances listed below. The concentration of the indicated
substances in water entering the system was reduced to a concentration of less
than or equal to the permissible limit for water leaving the system, as specified
in NSF/ANSI standard 42.
Substance
Influent Challenge Max. Permissible Product
Concentration
Water Concentration
Standard 42
Chlorine
2.0 mg/L±10%
2.0 mg/L±20%
Flow Rate=0.50 gpm (1.9 L/min)
Capacity=2,500 gallons (9464 L) or 12 months
Testing was performed under standard laboratory conditions, actual performance may vary.
Test Conditions
Flow Rate
= 0.50 gpm (1.9 L/min)
Inlet Pressure
= 60 psi (4.14 bar)
pH
= 7.5 ± 1
Temperature
= 68°F +/- 5°F (20°C +/- 2.5°C)
Operating Requirements
Pressure:
= 30 - 100 psi (2.07-8.62 bar)
Temperature
= 40 - 100°F (4.4 - 37.7°C)
Turbidity
= 5 NTU Max.
The IC-100A is Tested and Certified by WQA against NSF/ANSI 42 Standard for reduction of
aesthetic Chorine Taste and Odor and NSF/ANSI standard 372 for low lead compliance.
Do not use with water that is microbiologically unsafe or of unknown quality without
adequate disinfection before or after the system.
IOWA RESIDENTS ONLY:
Store or seller's name
Address
City
Telephone
Seller's signature
Customer's signature
QUESTIONS? Call Technical Support: 1-800-721-9243, Mon.-Fri., 8:00 AM-4:30 PM CST
culligan International company
Rosemont, Illinois 60018
www.culligan.com
©2012 Culligan International Company
Reduction
Minimum Average
Requirements
Reduction Reduction
≥50
76.7%
85.1%
State
Zip
Date
customer service M-F 8:00 a.m – 4:30 p.m. cst
Phone: 1-800-721-7360 Fax: 1-800-721-7390
International: Phone (847) 430-1239 • Fax (920) 457-7366
e-mail: customerservice@culligan.com
2
01024768 IC-100A Rev. B

Publicidad

loading