Maintenance And Servicing - Denios FGF 1602 Manual De Instrucciones

Betriebsanleitung
Assembly
1. Unpack all parts
2. Align the sides of the cabinet.
3. Put the cabinet joiner in place (1).
4. Put the grids in place and screw them down.
5. Screw the grids to the sides and place them on the cabinet joiner (1). Screw the grid joiner (2) down.
Screw the grids together in the middle using M6x20 screws and nuts held in place by washers.
6. Place the roof on the cabinet and screw it in place.
7. Screw the rear panel to the side panels from the inside.
Assembling the rear panel
1. Loosely screw the rear panel to the side panels
from the inside.
2. Push the grid support into the grooves in the
rear panel and screw it in place.
6. Specifications
See type label.
7. Operation
After opening the doors the gas cylinders can be placed in the pressurised gas cylinder cabinet using suit-
able equipment.
Secure gas cylinders to prevent them falling over, always secure individual cylinders with safety
chain!
Naked flame, naked light and smoking prohibited!
Decanting gas cylinders in the pressurised gas cylinder cabinet is prohibited!
Entering the gas cylinder cabinet is prohibited

8. Maintenance and servicing

Check the firm hold of the screwed connection.
-
Grease the locks and hinges with commercial grease where necessary.
-
Check the liquefied gas cylinder cabinet, particularly the holding brackets and securing chains for durability
-
and corrosion.
Flüssiggasflaschenschrank FGF 801 / FGF 1602
116957, 116958, 116959
Seite 6 von 12 Ausgabe 06/2007