Maintenance And Servicing - Denios ST 23 Manual Del Usuario

Betriebsanleitung
Assembly
1. Screw the rear panel loosely to the stabilising bar.
2. Put the rear panel in place and screw it loosely to the side panels and the stabilising bar.
3. Put the roof on the cabinet and screw it in place.
4. Check the screws have been tightened sufficiently.
5. The door can be opened to the right or the left, if the door opens on the left, the lock has to be turned at
an angle of 180º.
6. Place the grid on the ground.
7. Seal the roof with silicone.
6. Specifications
See type label.
7. Operation
After opening the doors the gas cylinders can be placed in the pressurised gas cylinder cabinet using suit-
able equipment.
Secure gas cylinders to prevent them falling over, always secure individual cylinders with safety
chain!
Naked flame, naked light and smoking prohibited!
Decanting gas cylinders in the pressurised gas cylinder cabinet is prohibited!
Entering the gas cylinder cabinet is prohibited

8. Maintenance and servicing

- Check the firm hold of the screwed connection.
- Grease the locks and hinges with commercial grease where necessary.
- Check the liquefied gas cylinder cabinet, particularly the holding brackets and securing chains for
durability and corrosion.
Flüssiggasflaschenschrank
ST 10 / ST 20 / ST 23 / ST 40
116960, 116961, 125056, 116962
Seite 6 von 12 Ausgabe 06/2006